Homa Installing Air Bleed Valve and Bracket Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pompes Homa Installing Air Bleed Valve and Bracket. HOMA Installing Air Bleed Valve and Bracket User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Publication
88PN3005
Please Contact
Technical Support At 203
-
736
-
8890 With Any Additional Questions
Please Be Prepared To Provide Pump Serial Number During Call
Page
1 of 1
Screw nipple assembly into motor cap using the
fittings shown in the photo at the right.
Always apply teflon tape or water-proof thread
sealent to prevent leaks
Place air bleed valve in the large hole in the metal
bracket.
Screw the two bolts on the motor cap through the
holes on the “arms” of the bracket. Leave the
bracket slightly loose and moveable
REMEMBER: The bolts on a motor cap are
frequently loctited and may need to be heated to be
removed.
Screw the air bleed valve into the top fitting of the
nipple assembly until the bottom surface of the
valve is flush with the bracket.
Align bolt holes in valve with bolt holes in bracket
and screw bolts completely through valve.
Put flat-sided washers and nuts on the end of the 5
bolts and tighten all loose nuts and bolts.
Installing Air Bleed
Valve and Bracket
Vue de la page 0
1

Résumé du contenu

Page 1 - Valve and Bracket

Publication 88PN3005 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Number

Commentaires sur ces manuels

Pas de commentaire